Search
Close this search box.

This product is no longer manufactured and not available to purchase new through authorized Nextivity partners.
We fully support this product and honor all active warranties.

Recommended alternative:
CEL-FI GO G41 FN (available in U.S.)

CEL-FI GO RED

The evolved smart signal booster that delivers cellular coverage in buildings for FirstNet emergency communications.

Only available in the US

In-Building Communication When You Need It Most

CEL-FI is a member of the Safer Buildings Coalition, which is an independent organization that’s focused on advancing policies, ideas, and technologies that ensure effective in-building communications capabilities for public safety personnel and the people they serve.

FirstNet is a new network being rolled out for Public Safety Communication Devices. This high-speed, nationwide wireless broadband network will have dedicated bands for public safety agencies and first responders. Legacy equipment does not support FirstNet dedicated band.

Remote Communication Kits are a standard tool for Public Safety Equipment, as not all areas have good Cellular. CEL-FI GO RED can be delivered as the core of a FirstNet portable communication solution.

Buildings of 30,000 Square Feet and above may require Public Safety Equipment, across 8 million US buildings. CEL-FI GO RED can work alongside existing equipment that works with legacy devices, so that FirstNet service is available at transition.

Introducing CEL-FI GO RED

The CEL-FI GO RED FirstNet Booster delivers cellular coverage in buildings for emergency communications from police, fire, and medical personnel. CEL-FI GO RED with the CEL-FI Antennas is the best way to ensure coverage in an emergency situation. Communication is not optional in critical times, rely on equipment that ensures the best coverage.

  • Boost FirstNet Band 14 and AT&T Band 12
  • 4G / LTE Voice and Data
  • Up to 15,000 ft2 (1,500 m2) of Coverage
  • Indoor / Outdoor NEMA 4 Rated

How it Works

There are a number of CEL-FI GO RED and antenna configurations based on the size of the building, building materials, and wall arrangements.

CEL-FI GO-Red Solutions

Single Unit Solution

This configuration is a single unit solution with 100 dB gain and coverage up to 10,000 ft2.

Multi Unit Solution

This configuration is a multi unit solution requiring 2 CEL-FI GO RED’s (or CEL-FI GO X) boosters and coverage up to 30,000 ft2.

Tech Specs

Configurations

Band 12/14
Band 3/20
(2 front-end receivers that relays 2 bands concurrently)

Rated Output Power

Uplink: 24dBm
Downlink: 16dBm

Frequency

Band 12:
___Downlink Frequency: 729 – 746 MHz
___Uplink Frequency: 699 – 716 MHz
Band 14:
___Downlink Frequency: 758 – 768 MHz
___Uplink Frequency: 788 – 798 MHz

Power

9.6 – 16.5V
2A current draw
16W nominal power consumption
NEMA 4 rated power plugs and jack

Environmental

Operating temperature: 0° to 65°C
Convection Cooling
Relative humidity: 0% to 95% (noncondensing)
RoHS 2 (European and China compliant)
WEEE
NEMA 4
Surface temp. (30° ambient): 53°C

Compliance

3GPP TS 25.143 Rel.10
3GPP TS 36.143 Rel.10
FCC Part 15, 90
Bluetooth BQB
CE

Physical Specifications

96.5 x 43.25 x 272.5 mm
850 g

Antenna Ports
(Donor and Server)

699 – 798 Mhz
Impedance: 50 Ohm

Model Numbers

G32-12/14X
G32-3/20X

Buy Now

Find out where you can buy a CEL-FI GO RED in your region.