Search
Close this search box.

CEL-FI QUATRA 4000e

Multi-Carrier Active DAS Hybrid for 3G/4G/5G Voice and Data.

Available in ASIA, EMEA and OCEANIA.
For North America, see model 4000/4000i

About QUATRA 4000e

Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, CEL-FI QUATRA 4000e is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe.
Unlike older analog boosters and passive DAS technology, CEL-FI QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes category cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).
Learn More
Off-Air or SuperCell Mode with Fiber Expansion
Network Safe and Carrier Approved with No Noise Guarantee
Remote Monitoring and Management via WAVE Platform
Up to 100 dB Max Gain for 3G/4G/5G Voice and Data
All Digital Category Cable PoE/RFoE Solution
Scalable Up to 12,000 m2 Coverage per Network Unit

System Components

QUATRA 4000e Network Unit

The Network Unit (NU) is the hub of the system. The scalable design works with one to six Coverage Units.

  • Provides donor signal to the CEL-FI QUATRA 4000e system
  • Provides power to Coverage Units (up to six)
  • Connects via ethernet or LTE Modem to the CEL-FI WAVE Platform for remote monitoring and management

Model Number:
_ › Q44-E999CNU

QUATRA 4000e Coverage Unit

QUATRA 4000e Coverage Unit

The Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power-Over-Ethernet (POE) for up to six CUs.
  • Provides coverage in the CEL-FI QUATRA system (up to six per Network Unit)
  • Power delivered by Power-Over-Ethernet from the Network Unit
  • Self-configuring and self-optimizing
  • CEL-FI QUATRA 4000e CU is only compatible with CEL-FI QUATRA 4000e NU

Model Number:
_ › Q41-EECU

QUATRA 4000e Fiber Hub

CEL-FI QUATRA 4000e Fiber Hub expands the Network Unit capacity from six to up to twelve Coverage Units. The fiber hub can be installed 2.0 km (1.24m) away from the NU to cover large spaces while maintaining the same signal quality throughout the system.
  • Multi-carrier Active DAS Hybrid
  • Donor source over fiber
  • Ofcom license exempt
  • SFP+ module not included

Model Number:
_ › Q40-EFNU

CEL-FI WAVE Portal

The CEL-FI WAVE Portal is a cloud-based remote management platform that enables device management and maintenance of CEL-FI QUATRA systems. The CEL-FI WAVE platform is designed to also work on mobile phones which facilitates ease of use on site.
Learn More

CEL-FI WAVE Portal

CEL-FI WAVE Portal

CEL-FI COMPASS

The CEL-FI COMPASS is an RF site utility that enables installers and integrators to install and optimize the CEL-FI QUATRA 4000e. The CEL-FI COMPASS requires the CEL-FI WAVE PRO app and this complete solution enables installation and optimization of systems without the need for local Internet Connectivity.
Learn More

Accessories

CEL-FI QUATRA 4000 Range Extender
CEL-FI QUATRA Fiber Range Extender
CEL-FI QUATRA Fiber Range Extender

Recommended Antennas

CEL-FI Blade Antenna (included)
CEL-FI LPDA-R Antenna
CEL-FI Low-Profile Antenna

Tech Specs

Bands
Bands Downlink MHz Uplink MHz Technology/Bandwidth
1 2110–2170 1920–1980 5G/4G/3G/20MHz
3 1805-1880 1710-1785 5G/4G/3G/20MHz
7 2620-2690 2500-2570 5G/4G/3G/20MHz
8 925-960 880-915 5G/4G/3G/15MHz
20 791-821 832-862 5G/4G/3G/20MHz
40* 2300-2390 2300-2390 5G/4G/3G/20MHz
* Available only on Donor Port A
Network Unit Dimensions
Coverage Unit Dimensions
Power (NU only)

Input Voltage: 85-264 V
Input Current: 2.45 A
Power Consumption: 480 W max.

Environmental

Operating temperature: 32 to 104 °F (0 to 40 °C)
Surface temperature: 111°F (44 °C) max. at ambient
Non-condensing Humidity: 0% to 95%
Heat Dissipation: Passive Convection

External Ports

CU Interface: 2x RJ45 per CU
# of CU max. per NU: 6
Donor Port RF Connectors: 4x 4.3-10 (f)

Downloads

Brief
QUATRA 4000e Brochure
QUATRA 4000e Fiber Hub Brief
Tech Specs
QUATRA 4000e Data Sheet
QUATRA 4000e Fiber Hub Data Sheet
User Manual
QUATRA 4000e Installation and User Guide
iBwave
QUATRA VEX Components
Planning Tools
QUATRA BOM Estimator
QUATRA Install Checklist
White Paper
QUATRA White Paper

Where to Buy

Find out where to buy in your region.
Become a Partner

Get Support

Have any questions about your system? Start here…

Keeping people connected through the world’s smartest cell phone signal boosters, public safety communication systems, private networking solutions, and HPUE devices. Powered by proprietary IntelliBoost® technology.

Quick Links
Connect

16550 West Bernardo Drive
Building 5, Suite 550
San Diego, CA 92127

+1 (858) 485-9442
[email protected]

Linkedin Instagram Youtube Facebook-f Twitter

©2024 Nextivity, Inc.